You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
79 lines
1.9 KiB
79 lines
1.9 KiB
/**
|
|
httpUpdate.ino
|
|
|
|
Created on: 27.11.2015
|
|
|
|
*/
|
|
|
|
#include <Arduino.h>
|
|
|
|
#include <ESP8266WiFi.h>
|
|
#include <ESP8266WiFiMulti.h>
|
|
|
|
#include <ESP8266HTTPClient.h>
|
|
#include <ESP8266httpUpdate.h>
|
|
|
|
#define USE_SERIAL Serial
|
|
|
|
#ifndef APSSID
|
|
#define APSSID "APSSID"
|
|
#define APPSK "APPSK"
|
|
#endif
|
|
|
|
ESP8266WiFiMulti WiFiMulti;
|
|
|
|
void setup() {
|
|
|
|
USE_SERIAL.begin(115200);
|
|
// USE_SERIAL.setDebugOutput(true);
|
|
|
|
USE_SERIAL.println();
|
|
USE_SERIAL.println();
|
|
USE_SERIAL.println();
|
|
|
|
for (uint8_t t = 4; t > 0; t--) {
|
|
USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
|
|
USE_SERIAL.flush();
|
|
delay(1000);
|
|
}
|
|
|
|
WiFi.mode(WIFI_STA);
|
|
WiFiMulti.addAP(APSSID, APPSK);
|
|
|
|
|
|
}
|
|
|
|
void loop() {
|
|
// wait for WiFi connection
|
|
if ((WiFiMulti.run() == WL_CONNECTED)) {
|
|
|
|
WiFiClient client;
|
|
|
|
// The line below is optional. It can be used to blink the LED on the board during flashing
|
|
// The LED will be on during download of one buffer of data from the network. The LED will
|
|
// be off during writing that buffer to flash
|
|
// On a good connection the LED should flash regularly. On a bad connection the LED will be
|
|
// on much longer than it will be off. Other pins than LED_BUILTIN may be used. The second
|
|
// value is used to put the LED on. If the LED is on with HIGH, that value should be passed
|
|
ESPhttpUpdate.setLedPin(LED_BUILTIN, LOW);
|
|
|
|
t_httpUpdate_return ret = ESPhttpUpdate.update(client, "http://server/file.bin");
|
|
// Or:
|
|
//t_httpUpdate_return ret = ESPhttpUpdate.update(client, "server", 80, "file.bin");
|
|
|
|
switch (ret) {
|
|
case HTTP_UPDATE_FAILED:
|
|
USE_SERIAL.printf("HTTP_UPDATE_FAILD Error (%d): %s\n", ESPhttpUpdate.getLastError(), ESPhttpUpdate.getLastErrorString().c_str());
|
|
break;
|
|
|
|
case HTTP_UPDATE_NO_UPDATES:
|
|
USE_SERIAL.println("HTTP_UPDATE_NO_UPDATES");
|
|
break;
|
|
|
|
case HTTP_UPDATE_OK:
|
|
USE_SERIAL.println("HTTP_UPDATE_OK");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
|